Engineering agent
- Model and calculation preparation
- Simulation output analysis
- Assumption and technical document review
Strategic partner
Your strategic partner in engineering, simulation and AI agents.
INFIRAD is a Saudi company specializing in three capabilities that work together: we design and review engineering, we test the idea with simulation before capital is committed, and we build AI agents specialized in your organization's field. Choose a service to see the details.
We verify the design before it is approved.
We design processes from concept to technical definition, and review designs and vendor packages independently. We turn the technical question into a model that can be examined, and close the study with a conclusion the decision can rest on.
What we offer
Conceptual process designEarly feasibility and decision support: block flow diagram (BFD), preliminary PFD, design basis and assumptions.
Basic process designPre-FEED technical definition: final PFD, stream tables, and an equipment list with its sizing basis.
P&ID development and reviewNew or corrective P&IDs and control-intent inputs, for design clarity and lower risk.
Independent review and owner's engineerDesign verification and risk review of PFDs, P&IDs, simulations and vendor packages, closing with a written technical opinion; owner's engineer support by stage.
What you receive
- A documented design basis and assumptions
- Reviewable mass and energy balances and models
- Comparison across scenarios and operating cases
- Diagnosis of constraints and sources of performance loss
- Recommendations ranked by impact, risk and feasibility
- An independent technical opinion for approval or redesign
Sectors: chemicals and petrochemicals · power generation · water treatment and desalination · energy storage and batteries · cooling and thermal systems · food and pharmaceutical industries. Engagements do not include vendor datasheets, detailed mechanical design or EPC deliverables unless stated in the scope.
Starting point: a design before you approve it, or a system whose performance you doubt.
We test the idea before capital is committed.
We model processes and systems to measure performance and cost, compare alternatives, and size equipment on a documented basis, from mass and energy balances to 3D flow and heat transfer. The value of simulation is not the picture. It is the decision you can prove.
What we offer
Steady-state process simulationMass and energy balances, flow diagram development, and equipment sizing.
Optimization and heat integrationParametric and sensitivity analysis, trade-off comparison, and heat recovery by pinch analysis.
Computational fluid dynamics (CFD)Flow and turbulence, pressure drop, heat transfer, and mixing of Newtonian and non-Newtonian fluids.
Thermal and dynamic modeling0D, 1D and 3D thermal modeling of batteries, electronics and cooling systems; transient behavior and control-system interaction.
What you receive
- A documented model you can review and re-run
- Alternatives compared on the same measures
- Where the constraint sits and what causes performance loss
- A recommendation memo for the next step
One application is our project INSYAB, which tests traffic decisions before they are built.
Starting point: an idea or technical question that needs a model to close it.
An agent built on your work, not a general chat window.
We build specialized agents for professional work, in engineering, law, finance and more, inside the organization's working environment and on its own sources, tools and methodology, to fit what it needs. The agent completes compound tasks and documents what it did. The decision stays with your specialists.
Fields we build agents for
Legal agent
- Referenced legal research
- Memoranda and contracts drafted and reviewed
- Regulations tracked
Finance agent
- Document cycle and entries
- Periodic reports
- Statutory obligations tracked
Research and review agent
- Documented research and review
- Summaries linked to their sources
- Periodic reports and analysis
Workflow automation
- Automated steps, approvals and follow-ups
- Systems, files and data integrated
- Multi-agent teams for compound tasks
An agent for your profession
Any professional work with sources and a method can have an agent built for it. We start with one task and measure the result before expanding.
What makes an agent trustworthy
- Works on your libraryYour documents, definitions and methodology, not only general knowledge.
- Documents every outputInputs, actions and references are logged for the specialist to review.
- Defined permissionsEach agent has a clear scope and sends nothing outside the organization without human approval.
- Measured before it runsTested on cases from your own work, and given a wider scope only on proven results.
- Works with your toolsHandles your files, systems and specialist tools to get the work done.
- The decision stays yoursThe agent executes and documents. Professional judgment and responsibility stay with your specialists.
How we build an agent
- Step 1
Understand the work
We map inputs, steps and decision points, and find where effort repeats.
- Step 2
Build and connect
We turn your method into an executable flow and connect it to your sources and systems.
- Step 3
Test and measure
We test normal and critical cases, and measure output quality before any expansion.
- Step 4
Run and improve
We monitor performance and the decision log, and improve the agent from real use.
We build and test our method inside INFIRAD first.The company's daily work in engineering, simulation, finance and research is run by a team of specialized agents under human oversight, and that experience is what we build our clients' agents from.
Starting point: one repetitive or complex task in your field.
Projects
Projects INFIRAD owns and is building.
This is where engineering, simulation and AI meet on a problem we own from the start.
SolarCool
Solar-thermal adsorption cooling
A cooling system that uses solar thermal input to drive an adsorption cycle, aimed at cooling applications where electrical demand and peak load are the governing constraint.
- Input: solar thermal energy
- Cycle: adsorption
- Governing constraint: electrical peak load
- Status: simulation and optimization
INSYAB
A traffic decision, tested before it is built
Traffic decisions are usually tested after construction, when reversing is expensive. INSYAB models the network and calibrates it to observed traffic behavior, then simulates the proposed change, measures its effect across the whole network, and compares alternatives on the same measures.
- Intersection and corridor upgrades
- Bottleneck diagnosis
- Closures and diversions
- Impact of new developments
Selected work
Experience our team brings to every engagement.
Modeling and simulation work completed earlier by the same engineers who deliver INFIRAD's services. The source models are retained and the methods are still in practice.
Oxy-fuel power cycle
A complete process flow diagram for an Allam Cycle power plant using supercritical CO₂ as the working fluid, with integrated carbon capture. The scope covered full mass and energy balances, equipment sizing, and process integration across multiple recycle streams.
55%Cycle efficiency
Non-Newtonian fluid mixing
A 3D model of a hydrolysis reactor in an anaerobic-digestion plant, characterizing the velocity field and viscosity distribution across a range of impeller speeds to find operating conditions that balance mixing adequacy against energy use.
3DCFD model
Nuclear power to fuel
A process flow diagram for methanol synthesis supported by a small modular reactor (SMR), combining thermodynamic cycle analysis, reaction kinetics and multi-stage separation into one coherent process design.
SMRSmall modular reactor
Method
From idea to certainty.
Three stages separated by two decision gates. A partnership moves to the next stage only on what the previous one has proven.
Drawn as a process flow diagram: the circles are the battery limits, the valves are the decision gates, and the numbers on the lines are stream numbers.
Stage 1
Concept & Verification
Define the idea, test feasibility, and expose risk early.
Stage 2
Simulation & Optimization
Model performance and cost, and compare the alternatives on data.
Stage 3
Development & Readiness
Technology integration, an execution roadmap, and investment-ready documentation.
Engagement models
A defined project, or a partnership across stages.
Work usually starts with a study, a model or a limited agent, and the value is measured before anything is scaled.
| Defined projects | Strategic technical partnerships | |
|---|---|---|
| Scope | Defined and time-bound | Staged, with decision gates |
| Basis | Fee-based | An embedded technical role |
| Suited to | A feasibility or verification study, a simulation for one question, or an agent for one task | Innovation programs, a system of agents across several tasks, major capital decisions |
| Availability | Standard | Selective |
Why INFIRAD
What one accountable partner gives you.
- Engineering leadership, not presentationsReviewable outputs: models, balances and a written technical opinion.
- Simulation before executionThe decision is tested on a model before capital is committed.
- Agents built on your workDesigned for your field, organization and task, with engineering discipline in testing and measurement.
- One partner, no biasNo interest in supply, and one party tying verification to the decision and the development path.
INFIRAD does not replace your internal teams, consultants or contractors. We strengthen the decision, reduce uncertainty, and enable execution.
Start with one question
A design, an idea to test, or a task for an agent?
Pick a design before you approve it, an idea you want tested by simulation, or repetitive work in your field for an agent to take on. We define the question, build the model or the agent for it, and measure the result before expanding.
- Phone and WhatsApp
- +966 530 151 525
- info@infiradeng.com
- Follow us
- Office
- Riyadh, Saudi Arabia